Base meter ST10
- Order number: 0230-500
- Price: upon request
- A communication module is required for data transmission to external signal processing (e.g. PLC).
Version: for type ST10
Description:
The basic meter is required for decentralized installation and external data evaluation. In case of larger distances between measuring and control point or difficult to access installation locations in the plant, the individual modules (basic meter, operating unit, relay module, etc.) can be installed separately from each other. The data transmission between the components is established without cumbersome wiring by means of plug connections via a data line and a protective cover / pulse converter.
- Material: PPO
Features & Advantages
- Measuring chamber: PPO/PPS
- Seal: FPM
- Magnet material: Ba/Fe / PA / stainless steel
| Produktgruppe: | Exzenterschneckenpumpen, Durchflussmesser |
| Accessories group: | Basic flow meter / Operating unit |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter