Base meter
- Order number: 0230-530
- Price: upon request
- A communication module is required for data transmission to external signal processing (e.g. PLC).
Version: for type UN10
Description:
The basic meter is required for decentralized installation and external data evaluation. The individual modules (basic counter, operating unit, relay module, etc.) can be installed separately from each other if there are large distances between the measuring and control points or if the installation locations in the system are difficult to access. Data transmission between the components is established without complicated wiring by means of plug connections via a data cable and a protective cover / pulse converter.
- Material: PPS
Features & advantages
- Measuring chamber: LCP
- Seals: FEP
- Magnet material: PPS encapsulated
- Ex. marking -ATEX: II 2G Ex h IIB T6...T4 Gb X
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
| Produktgruppe: | Exzenterschneckenpumpen, Durchflussmesser |
| Accessories group: | Basic flow meter / Operating unit |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter