Immersion depth: 1000 mm (sealless)
Description:
The electric pump set is suitable for low-viscosity, aqueous to slightly viscous media in the food & pharmaceutical sector and perfect for dispensing or decanting foodstuffs.
- Pumping unit equipped with Lutz Original handwheel
Features & advantages
- optionally with electric or compressed air drive
- lubricant-free: therefore no contamination of the pumped medium
- facilitated and accelerated emptying processes
- universally resistant ETFE shaft bearing
- easy disassembly: maintenance without special tools
- Sealing modules of the sealless (DL) pump can be replaced
| Pump tube (material): | Niro (Edelstahl) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | no seals in contact with the medium |
| Mechanical seal (material): | no seals in contact with the medium |
| Bearing (material): | ETFE |
| Drive shaft (material): | Edelstahl (1.4571) |
| Delivery rate (up to max. l/min)*: | 117 |
| Delivery rate with Nozzle (up to max. l/min)*: | 50 |
| Delivery head (up to max. mWS)*: | 19 |
| Fluid temperature (max °C): | 100 |
| density (up to kg/dm³): | 1.4 |
| Viscosity (up to mPas): | 500 |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Seal type: | Sealless (SL) |
| Immersion length (mm): | from 1000 mm |
| Immersion tube diameter (up to mm): | 41 |
| Thread (inch) outside: | 1 1/4" |
| Anschluss Tri-Clamp (DN): | 32 |
| Schlauchlänge (mm): | 2000 |
| Connection: | Tri-Clamp |
| Type of drive: | Electric |
| Output (W): | 500 |
| Voltage (V): | 230 |
| Frequency (Hz): | 50 |
| Protection type: | IP24 |
| Certification: | FDA-compliant |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
