Immersion depth: 1000 mm (sealless)
Note: The pump set is supplied without battery and charger.
The B2 Battery pump set is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources.
| Suitable media: | Natriumhypochlorit, Chromsäure, Flusssäure, Chlorsäure, Salpetersäure, Schwefelsäure |
| Pump tube (material): | PVDF (polyvinylidene fluoride) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | no seals in contact with the medium |
| Mechanical seal (material): | no seals in contact with the medium |
| Bearing (material): | ETFE / PTFE |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Delivery rate (up to max. l/min)*: | 80 |
| Delivery rate with Nozzle (up to max. l/min)*: | 45 |
| Delivery head (up to max. mWS)*: | 8 |
| Fluid temperature (max °C): | 90 |
| density (up to kg/dm³): | 1.6 |
| Viscosity (up to mPas): | 400 |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Seal type: | Sealless (SL) |
| Immersion length (mm): | from 1000 mm |
| Immersion tube diameter (up to mm): | 32 |
| Thread (inch) outside: | 1" |
| Schlauchlänge (mm): | 1500 |
| Type of drive: | Battery |
| Output (W): | 260 |
| Voltage (V): | 21,6 |
| Capacity (Ah): | 4 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
