LUTZ Elektrische Containerpumpe B200 PVDF, IBC Pumpe am Bodenablauf des Containers

Preview: LUTZ Elektrische Containerpumpe B200 PVDF, IBC Pumpe am Bodenablauf des Containers

Pump tube B200 PVDF

for concentrated acids and alkalis

Order number: 0123-420
Price: upon request
not suitable for flammable liquids

Description: The horizontal Pump tube is suitable for emptying highly aggressive, aqueous...more

Close menu

Product information "Pump tube B200 PVDF"

Version: without leakage detection
Type of seal: mechanical seal (GLRD)

Description:

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps.
Perfectly suited for the discharge of concentrated acids and alkalis.

Optionally with leakage detection (Safety Box)
Horizontal connection at the bottom of the container
IBC connection: S60 x 6

Features & Advantages

Optionally with electric or compressed air drive
Low loss of medium when disconnected
Easy to install
Easy to dismantle
Small footprint
Automatic emergency stop function of the motor in case of leakage detection

Technical data

Suitable media:

Bromsäure, Fluorwasserstoffsäure, Kaliumbromat, Dimethylphthalat, Schwefelsäure, Salpetersäure

Pump tube (material):

PVDF (polyvinylidene fluoride)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

FPM (fluororubber)

Mechanical seal (material):

Carbon, SiC, FPM, HC-4 (2.4610)

Bearing (material):

ETFE / PTFE

Delivery rate (up to max. l/min)*:

216

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

100

density (up to kg/dm³):

2.8

Viscosity (up to mPas):

1000

Conveyor wheel shape / drive type:

Axial-flow rotor

Seal type:

Mechanical seal (MS)

Immersion tube diameter (up to mm):

Version:

ohne Leckageerkennung

Type:

B200 PVDF 41-R-GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter