DMP Suction tube Niro for residual drainage

DMP Suction tube Niro for residual drainage

for flammable liquids

Order number: 5000-294
Price: upon request
For highly flammable liquids, a Pump tube with an explosion-proof Double diaphragm pump must be used, because otherwise the ATEX directives cannot be complied with.

Description: The Lutz DMP Pump tube for residual drainage (Niro) is suitable for...more

Close menu

Product information "DMP Suction tube Niro for residual drainage"

Immersion depth: 1200 mm

Description:

The Lutz DMP Pump tube for residual drainage (Niro) is suitable for thin-bodied, flammable and explosive liquids. The Pump tube can be suitably combined with our compressed air Double diaphragm pump 1/2" . Thus the emptying of the liquids is secured and saves important resources.

Can be combined with the compressed air Double diaphragm pump 1/2"
Suitable for Drum emptying alternative fuels, oils, flammable liquids

Features & Advantages

No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum residue emptying with remaining residual quantity of approx. 0.1 litre
No leakage in case of inclined position or repositioning of the pumping unit
Maximum product utilisation with reduced drum cleaning and disposal costs
Sealing module of the mechanical seal (GLRD) pump can be replaced

Technical data

Pump tube (material):

Niro (Edelstahl)

Drive shaft (material):

Edelstahl (1.4571)

Thread (inch) outside:

1 1/4"

Type:

DMP RE Niro 41-L-GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter