Double diaphragm pump AODD model 1/4” mini non-metallic

Double diaphragm pump AODD model 1/4” mini non-metallic

for small systems or in the laboratory sector

Order number: 5261-070
Price: A 128 | B 126 | C 74
is not suitable for the Ex-area

Description: The double diaphragm pump is suitable for pumping small quantities in the...more

Close menu

Product information "Double diaphragm pump AODD model 1/4” mini non-metallic"

Material: Polypropylene glass fibre reinforced (PP)
Material of diaphragm / check balls / seals: TFM-NBR (PTFE) / PTFE / PTFE
Centre block material: Polypropylene carbon fibre reinforced (PP)

Description of material: EPDM = ethylene propylene diene rubber, FPM = fluorine rubber,
NBR = acrylonitrile butadiene rubber, PP = polypropylene, PTFE = polytetrafluoroethylene,
TPC-ET + TFM (PTFE) = thermoplastic polyester elastomer + modified polytetrafluoroethylene,
TPV (EPDM-PP) = EPDM/PP compound

Description:

The double diaphragm pump is suitable for pumping small quantities in the laboratory sector and for occasional filling processes.

typical applications: Chemical circulation and feed, liquids with solid particles such as paints and lacquers, electroplating liquids, etc.
integrated muffler up to model size AODD 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)

Features & Benefits

high hydraulic performance
maintenance-optimised design and simple installation
self-priming (even when dry)
reinforced elastomers and thermoplastic diaphragms
absolutely oil-free
non-stalling operation

Technical data

Double diaphragm pumps (material):

non - metallic

Housing (material):

Polyvinylidene fluoride carbon fibre reinforced (PVDF)

Centre block (material):

Polypropylene carbon fibre reinforced (PP)

Diaphragms (material):

TFM-NBR (PTFE)

Valve ball (material):

PTFE (Polytetrafluorethylen)

Seals (material):

PTFE (polyvinylidene fluoride)

Valve seat (material):

PVDF (polyvinylidene fluoride)

Delivery rate (up to max. l/min)*:

10,8

Delivery head (up to max. mWS)*:

Solids (max. ø mm):

1,5

Fluid temperature (max °C):

Viscosity (up to mPas):

3500

Suction head dry (up to max. mwc*):

Air pressure (max. bar):

Air pressure start-up (min. bar):

Sound pressure level dB(A):

Displacement per chamber (in cm³):

Size:

1/4" mini

Lufteinlass ( Ø mm):

Pressure joint (inch) inside:

1/4"

Suction joint (inch) inside:

1/4"

Explosion protection:

Connection:

Gewinde

Type:

DMP 1/4" mini KNT PVDF/PTFE

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter