Barrel pump - acids

for acidic liquids

Order number: 0205-135
Price: on request
not suitable for flammable liquids

Description: Drum pump is suitable for corrosive, aqueous to slightly viscous...more

Close menu

Product information "Barrel pump - acids"

Motor: MA II 3 - 460W, 230V (for higher density of the medium)
Immersion depth: 1000 mm (sealless)

Description:

Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.

Examples of media: Hydrochloric acid, battery acid, ferric chloride, phosphoric acid, chromic acid and citric acid etc.
Pumping unit equipped with Lutz original hand wheel
suitable for decanting or transferring oils such as rapeseed oil and vegetable oil

Features & Advantages

optionally with electric or compressed air drive
no lubricants and therefore no contamination of the pumped medium by lubricants
optimized barrel emptying
universally resistant PTFE shaft bearings
Maintenance without special tools
Seal modules of the seal-less (DL) pump can be replaced

Technical data

Suitable media:

Zitronensäure, Eisen-III-Chlorid, Chromsäure, Phosphorsäure, Salzsäure

Pump tube (material):

PP (polypropylene)

Impeller (material):

PP (polypropylene)

Static seal (material):

no seals in contact with the medium

Mechanical seal (material):

no seals in contact with the medium

Bearing (material):

ETFE / PTFE

Drive shaft (material):

Hastelloy C (2.4610)

Delivery rate (up to max. l/min)*:

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

density (up to kg/dm³):

1.6

Viscosity (up to mPas):

500

Conveyor wheel shape / drive type:

Radial-flow impeller

Seal type:

Sealless (SL)

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

1 1/4"

Type of drive:

Electric

Output (W):

460

Voltage (V):

230

Frequency (Hz):

Protection type:

IP54

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Electric

Barrel pump

Stainless steel shaft

Lutz Elektrische Fasspumpe PP mit Universalmotor MI-4 |Pumpe für Säuren, Lösungen, Galvanik

Drum pump - Lyes

for low viscosity chemicals