Power supply unit NG10
for the series ST10, SL10, VA10, HDO 080, HDO 120, HDO 200, HDO 250, HDO 400, HDO 500
- Order number: 0230-230
- Price: upon request
Description:
The power supply unit provides the power supply for the control unit. When using a relay module, no additional power supply unit is required, as the module contains the power supply function.
- Voltage: 220 - 230 V
Features & Advantages
- Frequency: 50 - 60 Hz
- Marking: II (2) G [Ex ib Gb] IIC
| Voltage (V): | 230 |
| Frequency (Hz): | 60 |
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
| Type: | NG10 |
| Produktgruppe: | Durchflussmesser |
| Accessories group: | Module / Mains unit |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter