Tube integration
for Drum- and Container pumps
- Order number: 0302-106
- Price: upon request
- Suitable for pumping flammable and combustible liquids (e.g. ethanol, petrol) or in potentially explosive atmospheres.
Design: for Hose DN 19 (3/4")
Connection type: 1 1/4" IT
Material Brass
Description:
The hose connection ensures a good conductive transition between Hose and Pump tube. In hazardous areas the use of conductive Hoses is mandatory. The ohmic resistance between the fittings must be less than 106 Ohm.
- for Drum- and Container pumps
Properties & Advantages
- Material made of brass
- for Hoses with nominal width DN 32 / DN 38 / DN 50
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter