Pump tube Niro

for flammable liquids

Order number: 0150-003 + 0150-350
Price: upon request
The Atex guidelines can only be observed if a Pump tube with an explosion-proof Motor is used for highly flammable liquids.

Description: The Lutz Pump tube (stainless steel) is suitable for thin-bodied, flammable...more

Close menu

Product information "Pump tube Niro"

Dive depth: 700 mm
Seal type: Sealless (DL)

Description:

The Lutz Pump tube (stainless steel) is suitable for thin-bodied, flammable and explosive liquids. Depending on the application different Motors are available which can be combined with the Pump tube at any time. Thus you are flexible at any time and save important resources. The pump tubes can be disassembled and cleaned. They have no grease filling, which means that no products contamination occurs.

also available in special immersion depths from 200 - 2500 mm
Pump tube equipped with Lutz original hand wheel
Suitable for filling or transferring alternative fuels, oils, flammable liquids

Features & Advantages

optionally with electric or compressed air drive
physiologically harmless version (PURE)
hygienic/aseptic connections
No lubricants and therefore no contamination of the pumped medium by lubricants
suitable for food contact according to EC 1935/2004 and FDA

Technical data

Pump tube (material):

Niro (Edelstahl)

Static seal (material):

no seals in contact with the medium

Mechanical seal (material):

no seals in contact with the medium

Bearing (material):

Edelkohle

Drive shaft (material):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

124

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

100

density (up to kg/dm³):

1.9

Viscosity (up to mPas):

750

Conveyor wheel shape / drive type:

Radial-flow impeller

Seal type:

Sealless (SL)

Immersion length (mm):

from 500 mm

Immersion tube diameter (up to mm):

Anschluss Tri-Clamp (DN):

Explosion protection:

Connection:

Tri-Clamp

Certification:

FDA-compliant, Verordnung (EG) 1935/2004

Type:

Niro 41-R-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Stainless steel Shaft

Rotor

Pump tube Niro - PURE

for flammable liquids