Suction pipe
made of polypropylene (PP)
- Order number: 5000-120
- Price: op verzoek
Pipe length: 1000 mm
Connection type: 1 1/4" AG
Description:
The suction tube is required to be able to convey or suck in highly chemical media without the outer layer being attacked as in the case of immersion of a hose.
- Material: PP
Properties & Advantages
- Outer tube diameter 41 mm
- Tube length from 1000 - 1200 mm
- Connection: 1 1/4" AG
| Produktgruppe: | Membranpumpen |
| Accessories group: | Hoses / Discharge spouts / Suction pipe |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter