Hose length: 2000 mm
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose set is made of PVC with embedded and galvanized steel wire helix. The set is used for connection to the pumping station or nozzle.
- on request also available in special lengths
Features & Advantages
- Nominal width DN 25 (1")
- Hose connection aluminum
- Pre-assembled hose connections and hose clamps
Produktgruppe: | Fasspumpen / Containerpumpen, Exzenterschneckenpumpen, Membranpumpen |
Accessories group: | Hoses / Discharge spouts / Suction pipe |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter