Special chemical hose PTFE

for common and high purity media

Order number: 0374-482
Price: upon request
suitable for flammable and easily combustible liquids (e.g. ethanol, petrol) or in explosive environments

Description: The Hose is suitable for all common media, as well as high purity products....more

Product information "Special chemical hose PTFE"

Nominal size: DN 25 (1")
Note: Electrically conductive: type Ω/T (<106 Ohm between the fittings, <109 Ohm through the hose wall) according to DIN EN 12115:2011

Description:

The Hose is suitable for all common media, as well as high purity products. It can be used as either pressure or suction hose and complies with FDA and USP Class VI requirements. The Hose is electrically conductive so that it can also be used in explosive environments.

Nominal size: DN 19 / DN 25

Features & Advantages

Operating pressure up to max. 16 bar
Colour coding: "Blue/White/Red"
Complies with EU regulations 10/2011 and 1935/2004

Technical data

Fluid temperature (max °C):

100

Explosion protection:

Yes

Certification:

ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004

Produktgruppe:

Fasspumpen / Containerpumpen, Exzenterschneckenpumpen, Membranpumpen

Accessories group:

Hoses / Discharge spouts / Suction pipe

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter