TR3 Flow meter (PP)

for neutral and aggressive media

Order number: 0213-052
Price: upon request
not suitable for flammable liquids

Description: Easy to operate, compactly built and quick to mount on all Drum- and...more

Close menu

Product information "TR3 Flow meter (PP)"

for mounting on Nozzle (1 1/4")

Description:

Easy to operate, compactly built and quick to mount on all Drum- and container pumps: the Lutz Flow Meter TR3 in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.

PP for neutral and aggressive media
Media examples: Glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) interchangeable

Features & Advantages

Measurement according to the turbine wheel principle
Display of partial and total quantity
Variable display orientation
Mobile on a Drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Easy battery change

Technical data

Suitable media:

Eisen-III-Chlorid, Glykol, Phosphorsäure, Salzsäure

Housing (material):

POM (Polyoxymethylene)

Seals (material):

PTFE (polyvinylidene fluoride)

Measuring chamber (material):

PP (Polypropylen)

Axis (material):

Hastelloy C-22

Flow rates (up to l/min):

120

Fluid temperature (max °C):

Operating pressure (max. bar):

from 8 bar

Viscosity (up to mPas):

Messprinzip:

Turbinenrad

Connection:

Gewinde

External connection thread (inch):

1 1/4"

Messgenauigkeit kalibriert**:

± 1%

Wiederholgenauigkeit (%):

± 0,5

Connection:

Gewinde

Protection type:

IP65

Version:

Installation on nozzle

Type:

TR3-PP

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter