Dichtung: FPM (Fluorkautschuk)
Ausführung: ohne Taster
For filling and transferring for concentrated acids and alkalis. The body and the valve plug of the Nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet nozzles each(Ø 23mm and Ø12mm)
. The dispensing nozzle is sealed by means of an FPM seal.
| Housing (material): | Polyvinylidene fluoride carbon fibre reinforced (PVDF) |
| Static seal (material): | FPM (fluororubber) |
| Delivery rate (up to max. l/min)*: | 50 |
| Fluid temperature (max °C): | 80 |
| Operating pressure (max. bar): | 3 |
| Viscosity (up to mPas): | 760 |
| Thread (inch) outside: | 1 1/4" |
| Type: | Zapfpistole PVDF |
| Produktgruppe: | Fasspumpen / Containerpumpen |
| Accessories group: | Nozzles |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
